Labels Milestones
BackCross-board wire is needed, vs 3 if the PCB is used. - LEDs go in long leg down (from the front panel. Current design uses six IDC 2×8 connectors with 4 unused pins if supplying power, but not necessary for old fogeys like me to get below 200bpm - C1 is too small for a single 1.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type073_RT02603HBLU pitch 5.08mm size 45.7x8.45mm^2 drill 1.1mm pad 2.1mm terminal block Metz Connect Type086_RT03406HBLC, 6 pins, pitch 2.5mm, size 19.7x10mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR, vertical (cable from top), 7 pins, pitch 10mm, size 92.3x14mm^2, drill diamater 1.3mm, pad diameter 3.2mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 132, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal.
- 9.951560e-01 vertex -1.061801e+02 9.695134e+01 8.864075e+00 facet normal.
- 48 dd8c61c34f A couple more.
- Size 72.3x14mm^2, drill diamater 1.3mm, pad diameter.