synth_tools

Back

With two LEDs K switch dual double-pole single-throw OFF-ON D Double Pole Single Throw (SPST) switch, small symbol D 3x DIP Switch, Single Pole Single Throw (SPST) switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=13mm FS5700 series pushbutton footswitch, DPDT, https://www.e-switch.com/system/asset/product_line/data_sheet/226/FS5700.pdf Switch with High Contact Reliability, Side-actuated Model, without Ground Terminal, with Boss Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, without Ground Terminal, with Boss SPST button tactile switch https://cdn.sos.sk/productdata/80/f6/aabf7be6/5gth9358222.pdf Switch NKK G1xJP http://www.nkkswitches.com/pdf/gwillum.pdf SWITCH TOGGLE ILLUM SPDT NKK Switch, single pole triple throw, 3 position switch, SP3T K switch dual-pole double-throw DPDT 3pdt ON-ON D Push button switch, generic, two pins | Dailywell | PAS7B3M1CESA6-5 | Tayda | A-1138 | | | Tayda | A-1847 | | U3 | 1 | 100k | Resistor | | | | | | D1, D2, D3, D4, D5, D8, D9, D10 100V 0.15A standard switching diode, DO-35 Push button switch, generic, two pins D Push button switch, normally open, two pins, 45° tilted D Momentary Switch, single pole normally-open tactile switch http://www.ckswitches.com/media/1479/kmr2.pdf CK components KSC6 tactile switch https://www.ckswitches.com/media/1972/ksc6.pdf CK components KMR2 tactile switch 6mm ALPS SKHH right angle smd HDMI, Micro, Type D, THT, 0.4mm pitch, 19 ckt, right angle Molex 0.50mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0250, 25 Circuits (https://www.molex.com/pdm_docs/sd/2005280250_sd.pdf), generated with kicad-footprint-generator Capacitor SMD 0504 (1310 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SOP, 8 Pin (http://www.ti.com/lit/ds/symlink/tps62840.pdf#page=37), generated with kicad-footprint-generator Hirose series connector, B9P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a single 0.1 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-312, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 50x9.8mm^2, drill diamater 1.15mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-2-5.0-H pitch 5mm size 10x7.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00241 pitch 10.2mm size 45.7x8.3mm^2.

New Pull Request

Labels Milestones