Labels Milestones
BackKnobHeight = 20; // tweak on this one, but many external clock sources cycle between 0v and 5v max // gate out (j4/j10) // clock in (j2/j11) // casc out (j14/j15 // reset/casc in (j1/j13) // gate out (j4/j10) // clock out (j5/j12 // glide atten (rv15 // glide in (sleeve and normal both GND Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below Clock rate goes down when resistance goes up, opposite to expectation. C1 is too small for a single 2 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00087, vertical (cable from top), 9 pins, pitch 10mm, size 82.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-13-3.5-H pitch 3.5mm size 56x7.6mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MKDS-3-11-5.08, 11 pins, pitch 10.2mm, size 117x8.3mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-13-3.5-H, 13 pins, pitch 5mm, size 10x10mm^2, drill diamater 1.5mm, 2 pads, pad diameter 3mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf.
- Cylinder(h=chg, r=cord-cdp*smt/100, $fn=2*cfn, center=false); shape(fsh.
- 3.64807 2.3142 19.8418 facet.