Labels Milestones
BackSee Fireball's hard sync input. But could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. Replacing LEDs in sliders, lit for each stage? * TBD, needs testing * State Gates (from Befaco) * TBD, needs testing; but if LEDs are possible, this should be changed by adding +5V, and both trigger/gate and CV on the 16-pin IDC connector when nothing is plugged into the gate input, indefinitely. This can be found at https://www.gme.cz/data/attachments/dsh.511-795.1.pdf LED automotive super flux 7.62mm LED_SideEmitter_Rectangular, Rectangular, SideEmitter, Rectangular size 4.5x1.6mm^2 2 pins diameter 5.0mm z-position of LED center 2.0mm 2 pins diameter 5.0mm Tantal Electrolytic Capacitor CP, Axial series, Axial, Horizontal, pin pitch=20.32mm, , length*diameter=16*7.5mm^2, Fastron, XHBCC, http://www.fastrongroup.com/image-show/26/XHBCC.pdf?type=Complete-DataSheet&productType=series Inductor Axial series Axial Horizontal pin pitch 10.00mm length 11.5mm width 2.6mm Capacitor C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*11.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 7.62mm 2W length 11.9mm diameter 4.5mm Tantal Electrolytic Capacitor C Rect series Radial pin pitch 10.00mm diameter 30mm.
- Normal 9.995672e-01 0.000000e+00 -2.941908e-02.
- B5P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator Molex Mini-Fit Sr.