synth_tools

Back

System, 55932-0210, with PCB locator, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py HSOP 11.0x15.9mm Pitch 1.27mm Slug Down Thermal Vias (PowerSO-20) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/tda7266d.pdf, www.st.com/resource/en/application_note/cd00003801.pdf HSOP, 32 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT4222H.pdf#page=40), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-BE, 4 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV-BE-A, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV-BE-LC, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py 4-Lead Plastic QFN (2mm x 3mm) (see Linear Technology DFN_12_05-08-1723.pdf DFN, 12 Pin (https://www.nxp.com/docs/en/data-sheet/MMZ09332B.pdf), generated with kicad-footprint-generator JST GH series connector, S9B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Fuse SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py PLCC, 68 Pin (https://www.st.com/resource/en/datasheet/stm32h725ze.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py LFCSP-WD, 10 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001725D.pdf (Page 12)), generated with kicad-footprint-generator Harting har-flexicon series connector, BM14B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-3410, 34 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0604, 60 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator Molex Pico-Clasp series connector, S08B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole M3, height 8, Wuerth electronics 9774060360 (https://katalog.we-online.de/em/datasheet/9774060360.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-BE-A, 12 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator Inductor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator JST PH series connector, B11B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 1 mm² wires, reinforced insulation, conductor diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10688.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-405, 45Degree (cable under 45degree), 6 pins, pitch 5.08mm, size 66x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00074, 9 pins, pitch 10mm, size 52.3x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-301 45Degree pitch 5mm Varistor, diameter 21.5mm, width 5.6mm, pitch 10mm size 95x10.3mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-16-5.0-H pitch 5mm size 12.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-8-3.5-H, 8 pins.

New Pull Request

Labels Milestones