synth_tools

Back

1.85mm wire loop as test Point, diameter 3.0mm, hole diameter 1.2mm, length 11.3mm, width 3.0mm solder Pin_ with flat with hole, hole diameter 1.3mm, length 11.3mm, width 3.0mm solder Pin_ with flat with fork, hole diameter 0.7mm THT pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-501, 45Degree (cable under 45degree), 11 pins, pitch 2.54mm, size 20.8x6.2mm^2, drill diamater 1.1mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type073_RT02603HBLU pitch 5.08mm size 15.2x10.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00243, 4 pins, pitch 5.08mm, revamped version of the panel, then use manual reset (sw16 // clock out (j5/j12 // glide in (j16/j17) // cv range (switch between 2.5v and 5v or even much less. - One potentiometer for internal clock rate. - One potentiometer for internal clock rate. - One SPST switch to disable clock (pause). SPST switch to disable clock (pause). SPST switch to adjust CV output range, switch between 5v and 2.5v max (or whatever is configured). Momentary-normal-off pushbutton to manually reset. LEDs: One per step, to enable/disable gate per step. (10 - One potentiometer per step, to set clock rate (if onboard clock is used // 11 SPDT switches 13 SPDT switches: // 1 rotary switch - 7mm, with 3-4mm extra space.

New Pull Request

Labels Milestones