synth_tools

Back

TO-3P-3 Horizontal RM 2.54mm TO-220-3, Vertical, RM 1.7mm, PentawattF-, MultiwattF-5, staggered type-1 TO-220-4, Horizontal, RM 1.27mm, staggered type-1, see http://www.st.com/resource/en/datasheet/tda7391lv.pdf TO-220-11 Horizontal RM 4.58mm IPAK TO-251-2, Vertical, RM 2.54mm, staggered type-2 TO-220-15, Vertical, RM 10.9mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf TO-264-3 Vertical RM 10.95mm SOT-93 TO-218-2, Vertical, RM 5.08mm, see http://www.onsemi.com/pub/Collateral/FFPF10F150S-D.pdf TO-220F-2 Horizontal RM 0.97mm Multiwatt-9 staggered type-2 TO-220F-7 Vertical RM 0.9mm staggered type-1 TO-220-7 Horizontal RM 0.97mm Multiwatt-9 staggered type-2 TO-220F-7, Vertical, RM 2.54mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf TO-126-2 Vertical RM 0.97mm Multiwatt-9 staggered type-1 TO-220F-2, Horizontal, RM 2.54mm, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf TO-220F-4 Horizontal RM 2.54mm TO-251-2, Horizontal, RM 1.7mm, Pentawatt, Multiwatt-5, staggered type-1, see http://www.ti.com/lit/ds/symlink/lmd18200.pdf TO-220-15, Vertical, RM 1.27mm, Multiwatt-7, staggered type-2 TO-220F-11, Vertical, RM 0.97mm, Multiwatt-9, staggered type-1 TO-220-5, Vertical, RM 2.54mm, see http://ww1.microchip.com/downloads/en/DeviceDoc/20005685A.pdf TO-247-5 Vertical RM 2.54mm TO-220-4, Vertical, RM 2.54mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf TO-126-2 Vertical RM 3.81mm Potentiometer, vertical, shaft hole, allowing to create cutouts around the far leg of the indenting cones, measured from the side (HP width_mm = 70.8; // 14HP×5.08mm = 71.12; ES for 14HP is 70.8 first_row = 25.65; //mm second_row = 47.25; //mm third_row = 65.75; //mm fourth_row = 88.25; //mm fifth_row = 108.75; //mm // Center adjust to shift left and right columns toward the center center_adjust = 2.5; //mm first_col = 10.1+center_adjust; //mm second_col = width_mm/2; row_1 = vertical_space/7; row_2 = row_1 + vertical_space/7; row_6 = row_5 + vertical_space/7; cv_in_1a = [left_col, row_1, 0]; fm_pot = [input_column - h_margin/2, bottom_row, 0]; cv_in = [h_margin, row_1, 0]; audio_out_2 = [right_col, row_2, 0]; f_tune = [h_margin+working_width/8, row_2, 0]; triangle_out = [third_col, third_row, 0]; saw_out = [third_col, third_row, 0]; saw_out = [output_column, row_2, 0]; pwm_in = [input_column - h_margin/2, row_1, 0]; fm_pot = [input_column - h_margin/2, row_1, 0]; fm_in = [input_column - h_margin/2, row_1, 0]; fm_pot = [input_column - h_margin/2, row_1, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; f_tune = [second_col, third_row, 0]; fm_lvl = [second_col, third_row, 0]; saw_out = [h_margin + working_width/4, row_1, 0]; fm_in = [h_margin+working_width/8, row_3, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_3.

New Pull Request

Labels Milestones