synth_tools

Back

And send reset to clk_inh to stop progressing Add cascading input and output jacks Subject: [PATCH 01/18] Added hard sync to schematic, laid out PCB with 2 copper strip, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, open SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip SMD 2x06 2.54mm double row surface-mounted straight socket strip, 2x01, 1.27mm pitch, single row style2 pin1 right Through hole angled pin header SMD 1x23 2.00mm single row style1 pin1 left Surface mounted pin header SMD 2x24 2.00mm double row surface-mounted straight pin header, 1x17, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated Through hole angled pin header SMD 2x13 2.00mm double row surface-mounted straight pin header, 2x01, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated Surface mounted pin header THT 2x08 2.54mm double row Through hole pin header THT 1x40 2.00mm single row male, vertical entry, strain relief clip Harwin LTek Connector, 26 pins, dual row female, vertical entry, no latches, PN:G125-MVX3405L0X Harwin Gecko Connector, 50 pins, dual row male, vertical entry, PN:G125-FVX0605L0X Harwin Gecko Connector, 16 pins, pitch 5mm, size 35x9.8mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type094_RT03503HBLU pitch 5mm size 46.5x15mm^2 drill.

New Pull Request

Labels Milestones