synth_tools

Back

Pin pitch=10.00mm, , length*width=11.5*7.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX Dinkle DT-55-B01X Terminal Block WAGO 236-304 45Degree pitch 5mm size 40x7.6mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-106, 45Degree (cable under 45degree), 1 pins, pitch 5.08mm, hole diameter 1.3mm, wire diameter 0.8mm Test point with 2 copper strips net tie solder jumper bridged SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 pads, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PT-1,5-4-5.0-H, 4 pins, pitch 10mm, size 55x9mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-4-2.5-V-THR, vertical (cable from top), 2 pins, diameter 5.0mm 3 pins UFQFPN 20-lead, 3 x 10.1 mm, Time-Lag T, 250 VAC, 125 VDC (https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_UMT_250.pdf Surface Mount Fuse, 3 x switching (normalling) stereo jack and switching ground contact, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbhl-b B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4mamh-ph A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nsj12hf-1 Stacking Jacks, Stereo dual jack, full nose, https://www.neutrik.com/en/product/nsj8hc Stacking Jacks, Mono dual jack, quick fix nose, https://www.neutrik.com/en/product/nsj8hl Stacking Jacks, Stereo dual jack, full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hcd2 M Series, 6.35mm (1/4in) mono jack, switched, with full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hhd2 Slim Jacks, 6.35mm (1/4in) switching stereo jack, switched, half threaded nose, https://www.neutrik.com/en/product/nsj12hh-1 Stacking Jacks, Mono dual jack, half threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hcd2 M Series, 6.35mm (1/4in) stereo jack and switching ground contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbv-0 B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fi-v Combo I series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, lateral right PCB mount, https://www.neutrik.com/en/product/nc3faav A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, lateral right PCB mount, https://www.neutrik.com/en/product/nc3fahr1 A Series, 5 pole male XLR receptacle, grounding: without ground / shell contact, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fav1-0 A Series, 3 pole male XLR receptacle, grounding: ground contact to mating connector shell and front panel, lateral right PCB mount, https://www.neutrik.com/en/product/nc3fav B Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, horizontal PCB mount.

New Pull Request

Labels Milestones