3
1
Back

Without ground / shell contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv-sw B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 2.00u plate Cherry MX keyswitch 2.25u Matias/ALPS keyswitch, 2.75u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 2.25u, http://matias.ca/switches/ Matias ALPS keyswitch ISO enter 4-bit rotary coded switch, through-hole, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf SPST Off-On Pushbutton, 1A, 30V, CW Industries P/N GPTS203211B, http://switches-connectors-custom.cwind.com/Asset/GPTS203211BR2.pdf SPST button switch | | | C13 | 3 Hardware/PCB/precadsr/precadsr.sch | 4 .../PCB/precadsr_Gerbers/precadsr-B_Mask.gbr | 4 | 100 nF | Unpolarized capacitor | | C3, C4, C5 | 3 | A1M | Potentiometer | | ----- | --- | ---- | | S3 | 1 | B10k | \*\*Potentiometer, 16 mm 3.5 mm jack 3 mm LED 5 mm | | L1 | 1 | B20k | Potentiometer | | C3, C4, C11 | 3 | A1M | Potentiometer | | R9, R11, R13 | 3 Hardware/Panel/precadsr-panel/fp-lib-table | 2 | 47k | Resistor | | | | | | | | R24, R26, R28 | 3 | 10uF | Polarized capacitor | | Tayda | A-3186 | | Knobs | | R24, R26, R28 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | Tayda | A-159 | | | J6 | 1 | SW_Push | Push button switch, normally open, two pins, 45° tilted D Momentary Switch, dual pole double throw, separate symbols 2x5 pin shrouded header 2.54 mm spacing KK254 Molex header 100V 0.15A standard switching diode, DO-35"/> Steel retention lug, vertical PCB.

  • f63cfba9541079f9f5e1341fca38abad6837ea65 Add 55k-ish resistor.
  • 2.919812e-01 vertex -1.093059e+02 9.725134e+01 1.005824e+01.
  • New Pull Request