synth_tools

Back

Pin pitch=22.90mm, , diameter=24.4mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf Inductor Radial series Radial pin pitch 5.00mm diameter 7.5mm Fastron XHBCC Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9*5.3mm^2, , http://www.farnell.com/datasheets/529758.pdf Diode DO-201AE series Axial Horizontal pin pitch 10.00mm length 11.5mm width 6.6mm Capacitor C, Rect series, Radial, pin pitch=7.37mm, 10W, length*width=16.1*9mm^2, http://www.vishay.com/docs/30218/cpcx.pdf Resistor Radial_Power series Radial pin pitch 28.70mm diameter 40.64mm Vishay IHB-5 Inductor, Radial series, Radial, pin pitch=15.00mm, , length*width=16.5*13.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 6.00*6.00mm^2 length 11.5mm width 9.5mm height 9.5mm shunt pin pitch 5.08mm size 40.6x9.8mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type205_RT04503UBLC, 45Degree (cable under 45degree), 3 pins, pitch 10.2mm, size 15.2x8.3mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.75 mm² wires, reinforced insulation, conductor diameter 0.5mm, outer diameter 2mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex CLIK-Mate series connector, 501331-1107 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator JST ZE series connector, B11P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator Molex Molex 0.30mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0260, 26 Circuits (https://www.molex.com/pdm_docs/sd/2005280260_sd.pdf), generated with kicad-footprint-generator Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794108-x, 12 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 28 Pin (http://www.onsemi.com/pub/Collateral/601AE.PDF), generated with kicad-footprint-generator Molex Micro-Fit 3.0 Connector System, 5268-13A, 13 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole M2, height 5, Wuerth electronics 9774100360 (https://katalog.we-online.de/em/datasheet/9774100360.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xx-DV-TE, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py WSON, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ada4898-1_4898-2.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py Analog LFCSP-UQ, 10 Pin (https://fscdn.rohm.com/en/techdata_basic/ic/package/Jisso_MLGA010V020A-1-2_Rev005s_E2(MSL3).pdf ST HLGA, 10 Pin (https://www.nxp.com/docs/en/data-sheet/PCF85063A.pdf#page=48), generated with kicad-footprint-generator Molex Mini-Fit Jr. Power Connectors, 105309-xx02, 2 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SOP, 18 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=30523), generated with kicad-footprint-generator Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator Molex Sabre Power Connector, 46007-1106, With thermal vias in pads.

New Pull Request

Labels Milestones