X="3.8" y="3.3"/> - 2 pin Molex connector 2.54 mm spacing | | | | | | | | Tayda | A-4349 | | | | Q1, Q2, Q3 | 3 | A1M | Potentiometer | | C4, C5 | 3 | 10 uF | Unpolarized capacitor | | | | | | Tayda | A-4349 | | | | | C7, C12 | 2 | 1N5817 | Schottky diode | | | Tayda | A-1955 | | | Tayda | A-1955 | | | | | Q1, Q2, Q3, Q4, Q5 R1, R2, R23, R24 | 4 .../PCB/precadsr_Gerbers/precadsr-F_Cu.gbr | 4 .../PCB/precadsr_Gerbers/precadsr-F_Paste.gbr | 4 .../PCB/precadsr_Gerbers/precadsr-B_Mask.gbr | 481 .../precadsr-panel/precadsr-panel.kicad_sch | 831 Hardware/Panel/precadsr-panel/sym-lib-table | 4 .../PCB/precadsr_Gerbers/precadsr-F_SilkS.gbr | 1166 .../PCB/precadsr_Gerbers/precadsr-NPTH.drl | 17 .../Kosmo_LED_Hole.kicad_mod | 17 .../Bigger_Push_Switch_Hole_NPTH.kicad_mod | 18 Panels/luther_triangle_vco_quentin_v3.scad | 14 pin DIP socket A-004 4 Knobs Screws, nuts, and spacers (see build notes) 1 SIP socket, 2.54 mm, 1x7 Pin socket, 2.54 mm, 1x4 | | | | Tayda | A-559 | | | | | | | | | | Tayda | A-1605 | | Tayda | A-553 | | Tayda | A-1847 | | Tayda | A-159 | | | | | | S1 | 1 | AudioJack2_SwitchT | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | | | Tayda | A-111 | | | | C10 | 3 * https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M) The first two groups should be changed to IDC 2×6 connectors. If we expect or plan on developing modules which use the 4 pins (http://www.qingpu-electronics.com/en/products/WQP-PJ320D-72.html 3.5mm jack mic microphone phones headphones.
alt
click/enter