synth_tools

Back

JST SH series connector, S16B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SOIC, 16 Pin (http://www.st.com/resource/en/datasheet/l3gd20.pdf), generated with kicad-footprint-generator connector Molex KK-396 horizontal Molex MicroClasp Wire-to-Board System, 55935-1010, with PCB locator, 11 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator Resistor SMD 0612 (1632 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 38 Pin (http://www.ti.com/lit/ds/symlink/tlc5951.pdf#page=47&zoom=140,-67,15), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 36 Pin (https://www.onsemi.com/pub/Collateral/561AV.PDF), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator connector wire 0.5sqmm strain-relief Soldered wire connection, for 5 times 1.5 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-209, 45Degree (cable under 45degree), 1 pins, pitch 2.54mm, size 13.16x6.5mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00029 pitch 10mm size 65x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00013 pitch 5mm size 50x10mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-303 45Degree pitch 7.5mm Varistor, diameter 21.5mm, width 5mm, pitch 7.5mm Varistor, diameter 15.5mm, width 5.4mm, pitch 5mm size 46.5x15mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix PT-1,5-5-3.5-H, 5 pins, pitch 5.08mm, hole diameter 1.4mm wire loop as test Point, diameter 3.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 1.6mm, 2 pins, pitch 5mm, size 182x14mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-12-3.5-H pitch 3.5mm size 18.5x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00248 pitch 10.2mm size.

New Pull Request

Labels Milestones