synth_tools

Back

Resistor, Axial_DIN0309 series, Axial, Horizontal, pin pitch=15.24mm, , diameter=21mm, Vishay, IHB-2, http://www.vishay.com/docs/34015/ihb.pdf Inductor Radial Murata 1200RS Inductor, Radial series, Radial, pin pitch=5.00mm, , length*width=7.5*6.5mm^2, Capacitor C Radial series Radial pin pitch 22.50mm length 26.5mm diameter 20mm Electrolytic Capacitor CP, Radial_Tantal series, Radial, pin pitch=10.00mm, , length*width=11.5*5.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 5.00mm 3W length 22.2mm width 8mm Neosid SD8 Inductor, Radial series, Radial, pin pitch=37.50mm, , length*width=41.5*40mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 2.54mm size 15.7x6.5mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00027, 6 pins, pitch 7.5mm, size 14x15mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360410, block size 5x5mm^2, drill diamater 1.1mm, pad diameter 2.5mm, hole diameter 1.0mm low profile wire loop as test Point, diameter 1.5mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a single 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00306, 10 pins, pitch 2.54mm, size 13.2x6.2mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector http://www.phoenixcontact.com/us/products/1814744/pdf PhoenixContact PTSM0.5 8 2.5mm vertical SMD spring clamp terminal block RND 205-00088, vertical (cable from top), 5 pins, pitch 5.08mm, size 40.6x11.2mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type055_RT01504HDWU, 4 pins, pitch 7.5mm, size 32.3x14mm^2, drill diamater 1.2mm, pad diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Connector Phoenix Contact connector footprint for: GMSTBA_2,5/2-G; number of pins: 03; pin pitch: 3.81mm; Vertical || order number: 1924185 16A (HC Generic Phoenix Contact connector footprint for: MC_1,5/12-G-3.5; number of.

New Pull Request

Labels Milestones