3
1
Back

Pins, https://www.neutrik.com/en/product/nmj4hfd2 M Series, 6.35mm (1/4in) mono jack (T/S), https://www.neutrik.com/en/product/nj2fd-v 6.35mm (1/4 in) Vertical Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | Tayda | A-805 | | | | | | | 8 | 1N4148 | 100V 0.15A standard switching diode, DO-35 | | J1 | 1 | SW_SPDT | Switch, single pole double throw, separate symbols K switch dual-pole double-throw DPDT spdt ON-ON D Double Pole Single Throw (SPST) switch, small symbol D 10x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 8x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 8x DIP Switch, Single Pole Single Throw (SPST) switch with 12 positions D 2 pin Molex header 2.54 mm spacing KK254 Molex header 2 pin Molex header 2.54 mm spacing Q1, Q2, Q3 | 3 | 1nF | Unpolarized capacitor | Tayda | A-3588 | | | R25, R27, R29 | 3 | A1M | Potentiometer | | | C1, C11 | 2 main MK_VCO/Panels/Font files/futura medium bt.ttf differ Latest commits for file RadioShaek2Board.diy UX Rollup: 2x Sockets, all three pins need wires: - clk in - RESET / CASCADE out - CLK out - could be other values, ceramic may work, test debouncing. Maybe enlarge footprint if needed. Subject.

New Pull Request