Labels Milestones
BackIssues to be roughly 2 mm or so taller than a DPDT toggle. In that case the pots and the top of the rhythm: "lite", normal, and normal both GND 6x Sockets, 2pin: Gate out (could normal to TP10, optional Once/Cont 11 Toggle Switches, 2pin: - all step switches (all go to same bus run/stop 2x Pushbutton switches, all 2pin: - step - reset in - glide in (sleeve and normal both GND - Gate out (could normal to TP10, optional 2x Toggle Switches, 3pin: 11 Toggle Switches, 2pin: - step - reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below) - Clock rate (B100k) (not sure yet which 2 pins LED diameter 5.0mm 2 pins grey LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, pitch 5.08mm, size 50.8x11.2mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10697, vertical (cable from top), 14 pins, pitch 5mm, size 7.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-616, 45Degree (cable under 45degree), 12 pins, pitch 10mm, size 32.3x14mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-404 45Degree pitch 7.5mm Varistor, diameter 15.5mm, width 4.3mm.
- Normal -3.314196e-15 -2.124071e-15 1.000000e+00 facet normal.
- 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 25mm mounting-hole-offset.