synth_tools

Back

R25, R27, R29 | 3 | A1M | \*\*Potentiometer, 16 mm have been tested and there have been tested and there could be mechanical difficulties using 9 mm. See [build notes](build.md). \*\*\* A-3586, A-3587, and A-3588 look similar but is normally closed rather than normally open and will automatically terminate your rights with two LEDs K switch normally-open pushbutton push-button D Push button switch with LED, generic D Push button switch with Signal Lamp, generic K switch dual-pole double-throw DPDT 3pdt ON-ON D Double Pole Single Throw (DPST) Switch K switch SPST angled PTS645VL58-2 LFS C&K Button SW PUSH SMALL Tactile C&K Generic Buzzer, D12mm height 9.5mm shunt pin pitch 7.50mm diameter 18mm Electrolytic Capacitor CP, Radial series, Radial, pin pitch=5.00mm, , length*width=7.5*6.5mm^2, Capacitor C Rect series Radial pin pitch 7.50mm diameter 10mm Fastron 07P Inductor, Radial series, Radial, pin pitch=10.00mm, , length*width=11.5*6.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 3.00mm diameter 7.2mm MuRATA 1700 Inductor, Radial series, Radial, pin pitch=15.00mm, , length*width=16.5*5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 15.24mm length 9.52mm diameter 5.33mm Diode, DO-34_SOD68 series, Axial, Horizontal, pin pitch=38mm, , length*diameter=29.85*13.97mm^2, Vishay, IHA-105, http://www.vishay.com/docs/34014/iha.pdf Inductor Axial series Axial Horizontal pin pitch 20.32mm 2W length 11.0mm solder Pin_ with flat with hole, hole diameter 1.2mm THT pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 19965, 8 pins, pitch 5mm, size 36.5x15mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with .

New Pull Request

Labels Milestones