synth_tools

Back

205-00303, 7 pins, pitch 5.08mm, size 35.6x11.2mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block pitch 7.62mm 0.25W = 1/4W length 6.3mm diameter 2.5mm wire loop with bead as test point, pitch 2.54mm, package size 11.5x8.5x17.5mm^3, https://www.recom-power.com/pdf/Innoline/R-78HBxx-0.5_L.pdf DCDC-Converter, RECOM, RECOM_R5xxxPA, SIP-12, pitch 2.54mm, package size 11.5x8.5x17.5mm^3, https://www.recom-power.com/pdf/Innoline/R-78HBxx-0.5_L.pdf DCDC-Converter, RECOM, RECOM_R-78E-0.5, SIP-3, pitch 2.54mm, size 5.54x6.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-303, 45Degree (cable under 45degree), 12 pins, pitch 2.5mm, size 18x5mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00079 pitch 10mm Varistor, diameter 12mm, width 6.2mm, pitch 7.5mm size 75x10.3mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-306, 45Degree (cable under 45degree), 8 pins, pitch 3.5mm, size 25.5x8.3mm^2, drill diamater 1.5mm, 2 pads, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-208 45Degree pitch 5mm size 21.5x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 804-110, 45Degree (cable under 45degree), 16 pins, dual row female, vertical entry, strain relief clip Harwin LTek Connector, 44 pins, surface mount SMD Kemet EC2 signal relay DPDT double dual coil latching through hole M2, height 7, Wuerth electronics 9774130960 (https://katalog.we-online.de/em/datasheet/9774130960.pdf,), generated with kicad-footprint-generator Hirose DF13 through hole, DF11-8DP-2DSA, 4 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator Molex Micro-Fit 3.0 Connector System, 53047-0510, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.75 mm² wires, basic insulation, conductor diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00056, 45Degree (cable under 45degree), 10 pins, pitch 10mm, size 242x14mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MPT-0,5-12-2.54 pitch 2.54mm size 30.94x6.5mm^2 drill 1.1mm pad 2.1mm terminal block Metz Connect Type086_RT03404HBLC pitch 3.81mm length 9.53mm diameter 5.21mm Diode, DO-247 series, Horizontal, TabUp, P 10.9mm Diode, DO-247 series, Horizontal, TabUp, P 10.9mm Diode, DO-247 series, Vertical.

New Pull Request

Labels Milestones