synth_tools

Back

Size 18x5mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix MKDS-3-11-5.08, 11 pins, pitch 5mm, size 82.3x14mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-424, 45Degree (cable under 45degree), 5 pins, pitch 3.5mm, size 50x8.3mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00046, 3 pins, pitch 5mm, size 36.5x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-13-5.08, 13 pins, pitch 5.08mm, size 15.2x9.8mm^2, drill diamater 1.15mm, pad diameter 2.5mm, hole diameter 2.8mm SMD rectangular pad as test point, loop diameter 3.8mm, hole diameter 1.4mm wire loop as test Point, square 4.0mm side length SMD pad rectangle square THT rectangular pad as test Point, square 1.5mm side length SMD pad SMD pad as test Point, diameter 1.5mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex PicoBlade Connector System, 43045-0200 (alternative finishes: 43045-100x), 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 0.75 mm² wires, basic insulation, conductor diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-102, 45Degree (cable under 45degree), 2 pins, diameter 5.0mm z-position of LED center 2.0mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.0mm, 2 pins diameter 5.0mm z-position of LED center 2.0mm, 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm, 2 pins LED diameter 5.0mm z-position of LED center 9.0mm, 2 pins LED diameter 10.0mm 2 pins LED, diameter 8.0mm, 3 pins IR-LED, diameter 3.0mm, 2 pins diameter 3.0mm z-position of LED center 1.0mm 2 pins diameter 8.0mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center.

New Pull Request

Labels Milestones