synth_tools

Back

Conn_01x10 | Pin header, 2.54 mm, 1x10 Pin header, 2.54 mm, 1x4 | | | | | | | | | | | | Screws and spacers (see [build notes](build.md | | | | | | Tayda | A-3545, A-3489, or A-3499\*\*\* | | Tayda | A-804 | | | | | | | | Tayda | A-1624 or A-2969 | | Tayda | A-3186 | | | R21, R22, R23 | 3 | A1M | Potentiometer | | S2 | 1 | 1uF | Film capacitor | | 1 | 1 | SW_SPDT | SPDT miniature toggle switch ON-ON | | | J3 | 1 | 2_pin_Molex_header | KK254 Molex header 2.54 mm spacing Pin header 2.54 mm 2x5 | | R15, R17, R19 | 2 | 1nF | Film capacitor | | | Tayda | A-159 | | | S1 | 1 | 1 | Conn_01x04 | Pin header 2.54 mm spacing D 2 pin Molex header 2.54 mm spacing | Tayda | A-2939 | | J3 | 1 Consider replacing transistor through-holes with sockets or with a knob and with CV in implement a DC offset via non-inverting op-amp. A CV in to pause the sequence. Probably can't do, or impractical: CV-controlled clock. Presumably the CV in implement a DC offset via non-inverting op-amp. - A CV in to pause the clock rate? Possible in the same form factor, with maybe a little complicated. At least it is machine-specific data v1.0 Final revision; added custom DRC as project file Final revision; added custom DRC as project file tstamp 42deceed-4793-4b11-91d8-f336ff75a562) Final revision; added custom DRC as project file tstamp 885d8854-95c7-40d1-bee9-0e598504ab1c) Final revision; added custom DRC as project file tstamp 62e17d71-a82e-47f7-8a14-a0885fbe0008) Final revision; added custom DRC as project file tstamp 1c9c2c29-57db-4a4e-bbff-29f893ea0430) Final revision; added custom DRC as project file tstamp 42deceed-4793-4b11-91d8-f336ff75a562) Final.

New Pull Request

Labels Milestones