Labels Milestones
BackHole with radius: ", hole_r , " at ", width_mm - hole_dist_side, hole_dist_top); cylinder(r=hole_r, h=thickness*2); echo("Putting a hole with radius: ", hole_r , " at ", width_mm - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off - Single Step - 12V through 10k Ohms to U-1-14, more like 1M when off - Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below) Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below) - Clock Rate - variable resist +6k between U2-8 and U2-9 - Reset Sw - when pressed, short +12V and Reset In socket Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor as well - Once/Cont When in Cont mode shorts Casc Out normal to TP10, optional 2x Toggle Switches, 3pin: - CV out /* [Default values] */ // Four hole threshold (HP) four_hole_threshold = 10; threeUHeight = 133.35; // overall 3u height panelOuterHeight =128.5; panelInnerHeight = 110; //rail clearance = ~11.675mm, top and bottom railHeight = (threeUHeight-panelOuterHeight)/2; mountSurfaceHeight.
New Pull Request