synth_tools

Back

734-172 , 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-BE, 19 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 32 Pin (https://www.espressif.com/sites/default/files/documentation/0a-esp8285_datasheet_en.pdf), generated with kicad-footprint-generator JST XH series connector, 14110313001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 22-27-2091, 9 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-BE, 45 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator Molex PicoBlade Connector System, 53048-1510, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex Nano-Fit Power Connectors, 42819-32XX, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, S10B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator Hirose DF12C SMD, DF12C3.0-20DS-0.5V, 20 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a single 0.25 mm² wire, reinforced insulation, conductor diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-6-5.0-H pitch 5mm size 20x7.6mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-208, 45Degree (cable under 45degree), 36 pins, pitch 5mm, size 20x12.5mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-5, 5 pins, pitch 2.54mm, drill diameter 0.8mm Test point with 2 copper strips net tie solder jumper bridged SMD Solder 3-pad Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip SMD 2x13 1.27mm double row Through hole.

New Pull Request

Labels Milestones