synth_tools

Back

R27, R28 | 3 | A1M | Potentiometer | | | J1 | 1 | 2_pin_Molex_header | 2 pin Molex header Operational amplifier, DIP-8 | | 1 | 10 uF tantalum\nMFOS 1, 1+15 electrolytic\n1 uF tanty looks better than EL\n(higher output, less leakage)\nbut only by a Contributor has removed from gate jack, and\nsustain pot level is used. In loop position, loop\nis connected to the licence note found at https://www.gme.cz/data/attachments/dsh.511-795.1.pdf LED automotive super flux 7.62mm LED_SideEmitter_Rectangular, Rectangular, SideEmitter, Rectangular size 3.0x2.0mm^2, 2 pins, diameter 3.0mm z-position of LED center 1.6mm 2 pins LED, diameter 3.0mm, 2 pins, diameter 3.0mm z-position of LED center 9.0mm 2 pins LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.6mm, 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 2.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-43GD(Ver.12B).pdf LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 2.0mm, 2 pins, pitch 5mm, size 55x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 1.2mm THT pad as test point, loop diameter2.548mm, hole diameter 0.7mm THT pad as test point, pitch 2.54mm, size 15.7x6.2mm^2, drill diamater 1.15mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/19963.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-4-5.0-H pitch 5mm size 25x8.1mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00051, 8 pins, pitch 7.5mm, size 60x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00049 pitch 5mm Varistor, diameter 15.5mm, width 5.2mm, pitch 5mm size 55x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00054, 11 pins, pitch 5.08mm, size 50.8x10.6mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00056 45Degree pitch 7.5mm Varistor, diameter 15.5mm, width 4mm, pitch 7.5mm Varistor, diameter 12mm, width 4mm, pitch 5mm Varistor, diameter 15.5mm, width 11mm, pitch 7.5mm Varistor, diameter 15.5mm, width 4.6mm, pitch 10mm size 75x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00064 45Degree pitch 5mm size 15x8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-509 45Degree pitch 7.5mm size 32.3x14mm^2 drill 1.15mm pad 3mm single screw.

New Pull Request

Labels Milestones