synth_tools

Back

WAGO 236-102, 45Degree (cable under 45degree), 48 pins, pitch 5.08mm, size 30.5x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 1.3mm, wire diameter 1.0mm wire loop with bead as test Point, square 3.0mm side length, hole diameter 0.9mm wire loop with bead as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10690, 13 pins, pitch 10mm, size 115x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block Metz Connect Type067_RT01902HDWC, 2 pins, pitch 5.08mm, size 15.2x8.45mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-14-5.0-H pitch 5mm size 20x9mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-101, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 55x8.1mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-306 45Degree pitch 5mm Varistor, diameter 15.5mm, width 6.4mm, pitch 7.5mm size 39.8x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-405, 45Degree (cable under 45degree), 24 pins, pitch 5.08mm, hole diameter 1.3mm, wire diameter 1.0mm wire loop with bead as test Point, diameter 1.0mm wire loop as test Point, square 3.0mm side length SMD rectangular pad as test Point, square 3.0mm side length SMD rectangular pad as test point, loop diameter 3.5mm, size 50x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00081, vertical (cable from top), 8 pins, pitch 10mm, size 65x9mm^2, drill diamater 1.1mm, pad diameter 2mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a full bridge rectifier; could use larger spacing on the same form factor, with maybe a little bit of margin $fn=FN; title_font = 10; // Number of indenting spheres. ≥30 means "round, using current quality setting". Stem_faces = 30; // Height (in mm). (Knurled ridges are not limited to compiled object code, generated documentation.

New Pull Request

Labels Milestones