synth_tools

Back

0.5mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_TDFN_2x3_MN_C04-0129E-MN.pdf TDFN, 8 Pin (http://www.ti.com/lit/ds/symlink/lm5017.pdf#page=31), generated with kicad-footprint-generator connector wire 2sqmm strain-relief Soldered wire connection with feed through strain relief, for 5 times 2.5 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.5mm, hole diameter 1.5mm (loose fit), length 10.0mm solder Pin_ press fit solder Pin_ diameter 1.3mm, wire diameter 1.0mm wire loop with bead as test Point, square 4.0mm side length SMD rectangular pad as test Point, diameter 4.0mm Plated Hole as test point, pitch 6.35mm, size 12.7x12.5mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type175_RT02702HBLC pitch 7.5mm size 32.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-408, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 242x14mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00290, 5 pins, pitch 7.5mm, size 60x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block Phoenix MPT-0,5-8-2.54 pitch 2.54mm size 18.2x6.2mm^2 drill 1.1mm pad 2.2mm Terminal Block Phoenix MKDS-3-9-5.08, 9 pins, pitch 5mm, size 42.3x14mm^2, drill diamater 1.3mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py 64-Lead Plastic Thin Shrink Small Outline (SO) - Wide, 5.3 mm Body [HTSSOP], with thermal vias; see figure 8.2 of https://www.silabs.com/documents/public/data-sheets/efm8bb1-datasheet.pdf TDFN, 6.

New Pull Request

Labels Milestones