synth_tools

Back

S2B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Harting har-flexicon series connector, B9B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 26-60-4020, 2 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator JST PH series connector, S3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.3mm, height 14, Wuerth electronics 9775036960 (https://katalog.we-online.com/em/datasheet/9775036960.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-0820, 8 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator Soldered wire connection, for 6 times 0.75 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 3.5mm, size 15x8.3mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-7-2.5-V-THR, vertical (cable from top), 10 pins, dual row male, vertical entry, with latches, PN:G125-MVX1205L1X Harwin Gecko Connector, 34 pins, dual row male, vertical entry Harwin LTek Connector, 3 pins, pitch 10mm, size 105x9mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-311, 45Degree (cable under 45degree), 1 pins, pitch 5.08mm, size 40.6x10.6mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00009, 10 pins, pitch 10.2mm, size 15.2x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-15 pitch 5mm size 35x8.1mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type171_RT13702HBWC, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, pitch 3.5mm, size 22x8.3mm^2, drill diamater 1.3mm, pad diameter 1.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py DFN8 2x2, 0.5P (https://www.onsemi.com/pub/Collateral/511AT.PDF On Semiconductor, SIP-38, 9x7mm, (https://www.onsemi.com/pub/Collateral/AX-SIP-SFEU-D.PDF#page=19 8-Lead Plastic Dual Flat, No Lead Package (MR) - 9x9x0.9 mm Body [UQFN]; (see Microchip Packaging Specification 00000049BS.pdf SSOP28: plastic shrink small outline 7,5mm long https://toshiba.semicon-storage.com/info/docget.jsp?did=53548&prodName=TLP2770 6-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 3mm) (see Linear Technology DFN_14_05-08-1708.pdf DFN14, 4x4, 0.5P; CASE 505AB (see ON Semiconductor 122BX.PDF 32-Lead Plastic Thin Quad Flatpack No-Lead Package, 3x3mm Body (see Atmel Appnote 8826 64-Lead Plastic Thin Quad Flat, No Lead Package (JQ) - 4x4x0.5 mm Body [LFCSP.

New Pull Request

Labels Milestones