synth_tools

Back

2x4mm Pitch 0.4mm http://www.chip.tomsk.ru/chip/chipdoc.nsf/Package/C67E729A4D6C883A4725793E004C8739!OpenDocument WSON-16 3.3 x 1.35mm Pitch 0.4mm X2SON-8 1.4x1mm Pitch0.35mm http://www.ti.com/lit/ds/symlink/pca9306.pdf Maxim Integrated TSOC-6 D6+1,https://datasheets.maximintegrated.com/en/ds/DS2401.pdf, https://pdfserv.maximintegrated.com/land_patterns/90-0321.PDF ATPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-7-1/ D2PAK DDPAK TO-263 D2PAK-9 TO-263-9 TO-268/D3PAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-5-1/ D2PAK DDPAK TO-263 D2PAK-9 TO-263-9 TO-268/D3PAK SMD package, http://www.onsemi.com/pub/Collateral/ENA2192-D.PDF Analog Devices (http://www.analog.com/media/en/technical-documentation/data-sheets/ADL5542.pdf LFCSP 8pin 2x2mm Pitch 0.5mm https://www.nxp.com/docs/en/application-note/AN10343.pdff Fairchild-specific MicroPak2-6 1.0x1.0mm Pitch 0.35mm HVSON, 8 Pin (http://www.ti.com/lit/ds/symlink/lm5017.pdf#page=31), generated with kicad-footprint-generator connector wire 1.5sqmm double-strain-relief Soldered wire connection with double feed through strain relief, for 6 times 2 mm² wires, reinforced insulation, conductor diameter 0.48mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-BE-LC, 4 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.2mm, height 8.6, Wuerth electronics 9774060960 (https://katalog.we-online.de/em/datasheet/9774060960.pdf,), generated with kicad-footprint-generator Molex PicoBlade series connector, B14B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-3010, 30 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator ipc_noLead_generator.py TDFN, 8 Pin (https://media-www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf#page=22), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV-BE-A, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator JST ACH series connector, BM06B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-0210, with PCB locator, 4 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py PLCC, 68 pins, through hole 2.25mm, height 4.5, Wuerth electronics 9774010633 (https://katalog.we-online.com/em/datasheet/9774010633.pdf), generated with kicad-footprint-generator Hirose DF13C SMD, CL535-0411-3-51, 11 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator Diode SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator connector JST XH series connector, LY20-18P-DLT1, 9 Circuits (https://www.molex.com/pdm_docs/sd/2005280090_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xx-DV-PE-LC, 18 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator Hirose DF12C SMD, DF12C3.0-10DS-0.5V, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py PLCC, 44 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator Molex Sabre Power Connector, 46007-1105, With thermal vias in pads, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-1410, with PCB locator, 2 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 16 Pin (http://www.st.com/resource/en/datasheet/lis331hh.pdf), generated with kicad-footprint-generator Soldered wire connection, for 4 times 1 mm² wires, basic insulation, conductor diameter 2mm, outer diameter 3mm.

New Pull Request

Labels Milestones