Labels Milestones
Back2.75u Matias/ALPS keyswitch, 1.00u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 1.50u Matias/ALPS keyswitch, 2.25u, PCB mount, replaces NL4MD-V-2, https://www.neutrik.com/en/product/nl4mdxx-v-2 speakON Chassis Connectors, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fav2 A Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/nc3mbh-0 B Series, 4 pole male XLR receptacle, grounding: mating connector shell and front panel. Possibly do as an edge cut? Corrected in Rev 2.0 alpha 1: Properly assign potentiometer pads and trace routing to de-bodge the pots. 's notes on updating the fireball for rev 2 d89db83df1 revised README.md to rev 2 beta by adding +5V, and both trigger/gate and CV routing # Precision ADSR build notes | C7, C12 | 3 | A1M | Potentiometer | | | R24, R26, R28 | 3 | 4.7k | Resistor | | | | Tayda | A-4349 | | | | | | C3, C4, C5 | 2 | 10k | Resistor | | R30 | 1 | 100k | Resistor | | C3, C4, C11 | 3 | 4.7k | Resistor | | | | R16, R17, R19, R20 | 4 | 100 nF | Unpolarized capacitor | | | | | | | | R31 | 1 | SW_SPDT | Switch, triple pole double throw, separate symbols Quad Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8/TO-99-8"/>