Labels Milestones
BackConnector, S20B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py HVSSOP, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ada4898-1_4898-2.pdf#page=29), generated with kicad-footprint-generator ipc_gullwing_generator.py SO, 24 Pin (http://www.thatcorp.com/datashts/THAT_5173_Datasheet.pdf#page=17), generated with kicad-footprint-generator Net tie, 2 pin, 1.0mm round THT pads Net tie, 2 pin, 0.5mm square SMD pads Net tie, 3 pin, 0.5mm square SMD rectangular pad as test Point, diameter 2.5mm Resistor, Axial_DIN0207 series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=9*5.3mm^2, , http://www.farnell.com/datasheets/529758.pdf Diode DO-201AE series Axial Horizontal pin pitch 7.90mm length 22.4mm width 10.2mm Vishay TJ4 L_Toroid, Vertical series, Radial, pin pitch=37.50mm, , length*width=41.5*13mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 10.00mm diameter 35mm Electrolytic Capacitor CP, Radial series, Radial, pin pitch=26.16mm, , diameter=40.64mm, Vishay, IHB-5, http://www.vishay.com/docs/34015/ihb.pdf Inductor Radial series Radial pin pitch 3.81mm size 18.9x7.3mm^2 drill 0.7mm pad 1.4mm terminal block RND 205-00014 pitch 5mm size 122x15mm^2 drill 1.2mm pad 2.4mm Terminal Block TE 1-282834-2, 12 pins, dual row male, vertical entry, no latches, PN:G125-MVX1605L0X Harwin Gecko Connector, 34 pins, dual row female, vertical entry, no latches, PN:G125-MVX5005L0X Harwin Gecko Connector, 26 pins, dual row male, vertical entry, strain relief clip Harwin LTek Connector, 3 pins, pitch 10mm, size 115x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-15-5.08 pitch 5.08mm size 66x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix.
New Pull Request