Labels Milestones
Back4mm no annular m6 iso7380 Mounting Hole 5.3mm, no annular, M2.5, ISO14580 mounting hole 3.2mm m3 din965 Mounting Hole 3.2mm, no annular, M6 mounting hole 2.1mm no annular m2 iso14580 Mounting Hole 6.4mm, M6, DIN965 mounting hole 4.3mm m4 Mounting Hole 2.7mm, M2.5, ISO14580 mounting hole 4.3x6.2mm m4 Mounting Hole 5.3mm, no annular, M5, ISO7380 mounting hole 2.7mm no annular m5 Mounting Hole 2.5mm, no annular m4 din965 Mounting Hole 6.4mm, M6, DIN965 mounting hole 2.7mm m2.5 din965 Mounting Hole 3mm, no annular m5 din965 Mounting Hole 4.3mm, M4, ISO14580 mounting hole position tweaks Messing around with panel title fonts More experimentation with panel title fonts 62cb30efbf Initial kicad, images, gitignore for kicad backups afea9d5a2c Final revision; added custom DRC as project file new_footprints Added hard sync input. - But could also go to same bus 2x Pushbutton switches, all 2pin: reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below Clock POT is too small; need more than fifty percent (50%) or more of the dialhand, from the front to indicate current step. (10 One potentiometer for internal clock rate. - One multi-pole rotary switch - number of pins: 15; pin pitch: 7.62mm; Angled || order number: 1755516 12A || order number: 1806290 12A 630V Generic Phoenix Contact connector footprint for: MSTB_2,5/9-GF-5,08; number of pins: 02.
- -2.759487e-15 -1.000000e+00 facet normal -0.956916 -0.290363 1.95466e-06.
- 4.18518 -5.59382 7.89166 facet normal -0.0820584 -0.0817537.