Labels Milestones
BackAs traces - vias connect through the board, cross at 90° to minimize capacitance between traces - .3mm for non-power lines, .6mm if carrying power - MK uses a ground plane 56529bef3a Updates from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3fahr1-0 A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5fav B Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, lateral left PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3fbh2-e B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/ncj6fa-h Combo A series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nl4md-h-1 speakON Chassis Connectors, 4 pole chassis connector, black D-size flange, self tapping screw holes (A-screw), horizontal PCB mount, https://www.neutrik.com/en/product/ncj6fa-h Combo A series, 3 pole female XLR receptacle, grounding: without ground / shell contact, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fav1-0 A Series, 4 pole chassis connector, red.
- 24.5x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see.
- Normal 9.975514e-001 4.441445e-003 6.979536e-002.
- (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232H.pdf#page=57), generated with kicad-footprint-generator Molex Picoflex Ribbon-Cable.