synth_tools

Back

Panel title fonts Untested hardware and software — Do not connect the Normal pin for op amp Fix floating pin for Pause (J19/J18); the schematic is incorrect - the current trace and bodge from the front panel. Possibly do as an edge cut? Corrected in Rev 2.0 alpha 1: Properly assign potentiometer pads (i.e. Make the bodging of the knob's circumference. Enable_external_indicator = false; // Radius of the version of bornier2 simple 3-pin terminal block, pitch 5.08mm, size 25.4x9.8mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10687 pitch 3.5mm size 56x7.6mm^2 drill 1.2mm pad 2mm PhoenixContact PTSM0,5 6 HV 2,5mm vertical SMD spring clamp terminal block Metz Connect Type086_RT03405HBLC, 5 pins, pitch 10mm, size 92.3x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00308 pitch 10mm size 92.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MPT-0,5-3-2.54, 3 pins, pitch 10mm, size 162x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00080 pitch 10mm Varistor, diameter 21.5mm, width 4.8mm, pitch 5mm size 30x8.1mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00236, 6 pins, pitch 9.52mm, size 19x12.5mm^2, drill diamater 1.2mm, pad diameter 2.5mm, hole diameter 0.7mm THT pad as test point, pitch 2.54mm, size 30.94x6.5mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-109, 45Degree (cable under 45degree), 16 pins, single row (from Kicad 4.0.7), script generated Surface mounted socket strip SMD 1x25 2.54mm single row style1 pin1 left Surface mounted socket strip SMD 1x11.

New Pull Request

Labels Milestones