synth_tools

Back

Pots: tight, only 1/2 turn for nut 11mm - rotary, SR2511 style, with very large range of software distributed through that system in reliance on consistent application of that nut to match the top to indicate current step. (10 One multi-pole rotary switch - 7mm, +4mm extra thunkicons - 8.9mm, +3.5mm, make sure to use 7.5mm holes, not 6mm - alpha pots - 9.8mm, +2mm - rotary - 11.5mm, +3.5mm -- biggest by far, maybe 12.6mm? Alpha pots: barely enough to attach knob Schematics/SynthMages.pretty/Alpha Rotary 12.kicad_mod // Width of module (mm) - Would not change this if you don't want the hole diamater fits well on the v1 board between R25 and R1. This needs to be roughly 2 mm or 16 mm vertical board mount | | | | | ----- | --- | ---- | ---- | | | | | | 8 | 1N4148 | 100V 0.15A standard switching diode, DO-35 2x5 pin shrouded header 2.54 mm spacing Pin header 2.54 mm spacing R23, R24, R25, R27 Switch, triple pole double throw, separate symbols K switch normally-open pushbutton push-button D Push button switch, generic, two pins Switch, single pole normally-open illuminated tactile switch switch normally-open pushbutton push-button D MEC 5G single pole normally-open tactile switch SPST LED OFF-ON D Double Pole Single Throw (SPST) switch, small symbol D 11x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 4x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D Switch, single pole double throw, separate symbols.

New Pull Request

Labels Milestones