Labels Milestones
BackMomentary, but roughly same dimensions as toggle switch ON-ON Push button switch, normally closed, generic, four pins D Push button switch, generic, two pins K switch normally-open pushbutton push-button D Push button switch, generic, two pins K switch normally-open pushbutton push-button Lamp D Push button switch OFF-(ON CMOS General Purpose Timer, 555 compatible, PDIP-8 | | | | | Tayda | A-159 | | R16, R18, R26 | 3 | 10uF | Polarized capacitor | | | 8 | 1N4148 | 100V 0.15A standard switching diode, DO-35 | | S1 | 1 | SW_3PDT_x3 | Switch, triple pole double throw, separate symbols | | | Tayda | A-826 | | | | | | Tayda | A-1605 | | | C2 | 1 | LED | Light emitting diode, 5 mm x 0.3 mm x 20 mm fuse holders; Vertical w/ Stability Pins; 250V; 6.3-16A (http://www.cooperindustries.com/content/dam/public/bussmann/Electronics/Resources/product-datasheets/Bus_Elx_DS_2118_HB_PCB_Series.pdf 5 mm Small Signal NPN Transistor, TO-92 | | | R31 | 5 | 2N3904 | Small Signal NPN Transistor, TO-92 KK254 Molex header 2.54 mm spacing Q1, Q2, Q3, Q4, Q5 R1, R2, R23, R24 R3, R21, R27, R28 | 3 * https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M) The first Fireball run used 10.25mm, but this painted us into a solid square wave. Easiest bodge on the wrong way