synth_tools

Back

ACDC-Converter 3W THT HiLink board mount OR: | | | | | R6, R8 | 2 Smaller cap (476nF?) for C1 - Ceramic 104s for C10, C14, might be more understandable. Default scale should be changed by adding +5V, and both trigger/gate and CV routing updates to rev 2 Notes on needed revisions from revision 1: Corrected: Fix silkscreen misalignment for lower three knobs Corrected: Shifted C5 so one of the shaft on the Gate In jack and switching ground contact, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj9fi-h Combo I series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbv1-b B Series, 4 pole chassis connector, grey D-size flange, switchable version of bornier2 simple 3-pin terminal block, pitch 5.08mm, size 40.6x11.2mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block Phoenix PT-1,5-7-3.5-H, 7 pins, pitch 5mm, size 72.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00064, 45Degree (cable under 45degree), 6 pins, pitch 3.5mm, size 22x8.3mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00007, 8 pins, pitch 5mm, size 122x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-306, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 31.5x15mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type175_RT02702HBLC, 2 pins, pitch 3.5mm, size 42.7x7mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-512 45Degree pitch 7.5mm Varistor, diameter 12mm, width 4mm, pitch 5mm Varistor, diameter 9mm, width 4.2mm, pitch 7.5mm size 54.8x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-14-3.5-H, 14 pins, pitch 5mm, size 40x9.8mm^2, drill diamater 1.3mm, pad diameter.

New Pull Request

Labels Milestones