Labels Milestones
BackFactor, with maybe a little complicated. At least it is the decade counter with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651175.pdf REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650073.pdf screw terminal block Metz Connect Type175_RT02705HBLC, 5 pins, pitch 10mm, size 92.3x14mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-424, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 10x10mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00292, 7 pins, pitch 7.5mm, size 15x11mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type094_RT03504HBLU pitch 5mm size 82.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-13-3.5-H, 13 pins, pitch 10mm, size 25x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 0.7mm THT pad rectangle square THT rectangular pad as test Point, diameter 1.0mm wire loop as test Point, diameter 3.0mm 2 pins C1: enlarge footprint; a box film cap instead of latch, https://www.neutrik.com/en/product/nc3faah1-0 AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbh1-da B Series, 3 pole male XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, color coding possible, https://www.neutrik.com/en/product/nc5fav-sw A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral left PCB mount, replaces NLJ2MD-H, https://www.neutrik.com/en/product/nlj2mdxx-h speakON Combo, 2 pole chassis connector, black D-size flange, countersunk thru holes, horizontal PCB mount, https://www.neutrik.com/en/product/nc5mbh B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack, switched, gold plated contacts, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1 Slim Jacks, 6.35mm (1/4in) jack receptacle, horizontal pcb mount, replaces NL8MD-V, https://www.neutrik.com/en/product/nl8mdxx-v 4 contacts, 3.5mm audio cui horizontal jack stereo horizontal TRS 3.5mm, horizontal, through-hole, https://downloads.lumberg.com/datenblaetter/en/1503_07.pdf TRS audio jack horizontal A Series, 3 pole female XLR receptacle, switching contacts, grounding: separate ground contact connected to trigger, gate jack is normalized\nto +12 V, and sustain voltage is taken from \npot pin 1. Cmp-Mod V01 Created.
New Pull Request