Labels Milestones
BackFile Schematics/shaek_try_1.diy Add kicad schematic, some diylc noodling Initial stab at a 10-step panel layout ideas working_height = height / 2 + hole_diameter + hole_margin*2; cutout_width = board_width - (side_margin * 2); cutout_height = board_height - (top_margin * 2); hole_horiz = (board_width - hole_hdist) / 2; standoff_radius = hole_radius * 2.5; Latest commits for file RadioShaek2Board.diy UX Rollup: 2x Sockets, all three pins need wires: - clk in - CV out, with probably +12v gates. - Variable step count, 1-10 steps possible (with 2-3 extra switch positions to re-use for frequently-swapped positions). - External reset via momentary push button. - Play continuously or play once (switch to select.
- Length*width=16.5*4.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial.
- Path="/607ED812/60802B98" Ref="R111" Part="1" AR Path="/607ED812/60C38343" Ref="R12.
- Pitch=17.00mm, , diameter=11.176mm, Diameter12-5mm, Amidon-T44 L_Toroid.
- 9.665134e+01 1.173829e+01 vertex -1.093546e+02 9.665134e+01.