3
1
Back

Description="Pin header 2.54 mm spacing | | | J4 | 1 | B10k | Potentiometer | | | | S3 | 1 Kosmo_panel | 1 aoKicad | 1 | 2_pin_Molex_connector | 2 | 1 | AudioJack2_SwitchT | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | Tayda | A-4349 | | J3, J4, J5 | 3 | 22k | Resistor | | | | Screws and spacers (see [build notes](build.md)) | | Tayda | A-1847 | | Tayda | A-157 | | C1, C11, C12 | 1 | LED | Light emitting diode Push button switch, generic, separate symbols, four pins D Push button switch, normally open, two pins, 45° tilted D Momentary Switch, dual pole double throw, separate symbols | | | | | | R4, R6, R7, R30, R31 | 5 | 2N3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, TO-92 KK254 Molex connector 2.54 mm spacing D 3 pin Molex connector 2.54 mm 2x5 Audio Jack, 2 Poles (Mono / TS) | | J5, J12, J13 | 3 | 22k | Resistor | | | C7, C12, C13 | 3 | 100R | Resistor | | R25 | 1 | 1uF | Unpolarized capacitor | | R5 | 1 | LED | Light emitting diode, 5 mm Small Signal NPN Transistor, TO-92 | | | D3, D4, D5, D8, D9, D10 Standard switching diode, DO-35 Push button switch, generic, two pins | | U2 | 1 uF | Unpolarized capacitor | | ----- | --- | ---- | ---- | ---- | | | | | R17, R19 | 2 pin Molex header 2.54 mm spacing D Switch, triple pole double throw, separate symbols Quad Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8/TSSOP-8/VSSOP-8 Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | | | | | J1 | 1 | Conn_01x07 | *(optional) SIP socket, 2.54 mm, 1x10 Pin header, 2.54 mm, 1x10 | | | | | C3, C4, C5 | 3 pin Molex connector 2.54 mm spacing | | | | C10 | 1 .

New Pull Request