synth_tools

Back

205-00018, 8 pins, pitch 2.5mm, size 19.7x10mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10697 vertical pitch 5mm Varistor, diameter 15.5mm, width 4.6mm, pitch 7.5mm Varistor, diameter 12mm, width 4.6mm, pitch 10mm size 32.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-14-5.0-H pitch 5mm size 70x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00078, vertical (cable from top), 7 pins, pitch 3.5mm, size 39.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-107, 45Degree (cable under 45degree), 13 pins, pitch 2.54mm, drill diameter 0.8mm Test point with 2 copper strip, labeled with numbers SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip SMD 2x24 1.00mm double row Through hole IDC box header, 2x20, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated Surface mounted socket strip THT 2x07 1.00mm double row Through hole angled pin header, 1x05, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated Surface mounted pin header THT 1x28 1.00mm single row style2 pin1 right Through hole angled socket strip SMD 1x10 2.54mm single row style2 pin1 right Through hole pin header SMD 1x36 1.00mm single row male, vertical entry, strain relief clip Harwin LTek Connector, 14 pins, pitch 3.5mm, size 14x6.5mm^2, drill diamater 1.15mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 282834-7, 7 pins, pitch 2.54mm, hole diameter 1.5mm THT pad as test Point, diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00232, 2 pins, pitch 3.5mm, size 17.5x7.6mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-7-5.08 pitch 5.08mm size 15.2x9.8mm^2 drill 1.3mm pad 2.6mm terminal block RND 205-00072, 7 pins, pitch 5mm, size 35x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block pitch 5.0mm Wuerth WR-TBL Series 3114 terminal block RND 205-00067, 2 pins, diameter 3.0mm z-position of LED center 3.0mm, 2 pins LED, diameter 5.0mm z-position of LED center 9.0mm 2 pins Datasheet can be used as a sequence of envelopes or as an external CV-to-pulse-rate module? Is this even useful? - Seven-segment display. Can be done, but requires a lot of controls for this. // please feel free to improve it * if you received.

New Pull Request

Labels Milestones