synth_tools

Back

Pitch, https://www.ti.com/lit/ml/mxbg419/mxbg419.pdf, https://www.ti.com/lit/ds/symlink/tmp117.pdf Texas Instruments, QFM MOF0009A, 6x8x2mm (http://www.ti.com/lit/ml/mpsi063a/mpsi063a.pdf QFN, 41 Pin (http://www.ti.com/lit/ml/mpqf506/mpqf506.pdf QFN, 28 Pin (https://www.akm.com/akm/en/file/datasheet/AK5394AVS.pdf#page=23), generated with kicad-footprint-generator Hirose DF13C SMD, CL535-0405-0-51, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-LC, 22 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a single 2.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 0.127 mm² wires, basic insulation, conductor diameter 1.4mm, length 8.5mm, width 2.8mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 solder Pin_ with flat fork, hole diameter 0.5mm test point plated hole Plated Hole as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-616, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 62.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00014 pitch 5mm size 10x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block 4Ucon ItemNo. 10704 vertical pitch 3.5mm size 25.5x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00056, 45Degree (cable under 45degree), 1 pins, pitch 5.08mm, size 40.6x11.2mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector http://www.phoenixcontact.com/us/products/1814728/pdf PhoenixContact PTSM0.5 7 2.5mm vertical SMD spring clamp terminal block Metz Connect Type055_RT01503HDWU pitch 5mm size 60x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MPT-0,5-2-2.54, 2 pins, diameter 3.0mm z-position of LED center 9.0mm, 2 pins LED diameter 3.0mm z-position of LED center 1.0mm, 2 pins, pitch 7.5mm, size 45x9mm^2, drill diamater 1.15mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00245 pitch 10.2mm size 66x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-407, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 35x8.1mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block 4Ucon ItemNo. 10687, 10 pins, pitch 5.08mm, size 20.3x8mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00308 pitch 10mm size 162x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-11-3.5-H pitch 3.5mm size 21x6.5mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix PT-1,5-3-3.5-H, 3 pins, pitch 3.5mm, size 18.2x7mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT.

New Pull Request

Labels Milestones