synth_tools

Back

28.7x7mm^2 drill 1.2mm pad 3mm single screw terminal block RND 205-00081 vertical pitch 2.5mm size 12.2x10mm^2 drill 1.2mm pad 2.3mm terminal block RND 205-00289, 4 pins, pitch 5mm, size 20x8mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00004, 5 pins, pitch 5.08mm, size 30.5x11.2mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block Metz Connect 360272, block size 5x4mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-16-3.5-H, 16 pins, dual row male, vertical entry, no latches, PN:G125-MVX1605L0X Harwin Gecko Connector, 10 pins, pitch 5.08mm, hole diameter 1.0mm test point THT pad rectangle square SMD pads Net tie, 4 pin, 0.5mm square SMD rectangular pad as test Point, diameter 1.5mm wire loop as test Point, square 1.5mm side length, hole diameter 1.2mm, length 11.3mm, width 3.0mm Capacitor C, Rect series, Radial, pin pitch=7.50mm, , diameter*width=12.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf C Disc series Radial pin pitch 25mm length 19mm diameter 7.5mm Fastron XHBCC Inductor, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=3.8*2.6mm^2, http://www.vishay.com/docs/45231/arseries.pdf C Axial series Axial Horizontal pin pitch 14.70mm diameter 16.8mm Vishay TJ3 BigPads L_Toroid, Vertical.

New Pull Request

Labels Milestones