synth_tools

Back

, length*width=22.4*10.2mm^2, Vishay, TJ4, http://www.vishay.com/docs/34079/tj.pdf L_Toroid Vertical series Radial pin pitch 10.00mm length 11.5mm width 2.8mm Capacitor C, Rect series, Radial, pin pitch=5.00mm, , diameter=9.0mm, Tantal Electrolytic Capacitor CP, Axial series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf Resistor Axial_DIN0207 series Axial Horizontal pin pitch 12.7mm length 7mm width 6.5mm Capacitor C, Rect series, Radial, pin pitch=7.62mm, 5W, length*diameter=20*9mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf Resistor Axial_DIN0414 series Axial Horizontal pin pitch 18mm length 11mm diameter 4.5mm Electrolytic Capacitor CP Radial series Radial pin pitch 10.00mm diameter 26mm Electrolytic Capacitor CP Axial series Axial Vertical pin pitch 5.00mm length 7.2mm width 8.5mm Capacitor C, Rect series, Radial, pin pitch=2.50mm, , diameter=6.0mm, http://www.abracon.com/Magnetics/radial/AIUR-07.pdf Inductor Radial series Radial pin pitch 15.24mm 0.25W = 1/4W length 6.3mm diameter 2.5mm SMD pad as test Point, square 2.5mm side length SMD pad as test Point, diameter 2.5mm, hole diameter 1.0mm, wire diameter 1.0mm THT rectangular pad as test Point, square 1.5mm side length SMD pad as test point, pitch 2.0mm, hole diameter 0.9mm wire loop as test point, loop diameter2.6mm, hole diameter 1.1mm, length 10.2mm, width 3.5mm Capacitor C, Disc series, Radial, pin pitch=7.50mm, , length*width=10*4mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf C Rect series Radial pin pitch 2.54mm size 20.78x6.5mm^2 drill 1.1mm pad 2.1mm Terminal Block Phoenix PTSM-0,5-4-2.5-V-THR vertical pitch 3.5mm size 25.2x7mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-603 45Degree pitch 7.5mm size 89x15mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix PT-1,5-16-5.0-H pitch 5mm size 15x9.8mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect 360271 size 9x7.3mm^2 drill 1.5mm pad 3mm Terminal Block 4Ucon ItemNo. 10697 vertical pitch 3.5mm size 32.5x8.3mm^2 drill 1.3mm pad 2.6mm terminal block RND 205-00287, 2 pins, pitch 3.5mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-137 , 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Resistor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: A-41791-0008 example for new part number: 5273-10A example for new part number: 26-60-4170, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.75 mm² wires, basic insulation, conductor.

New Pull Request

Labels Milestones