X="3.75" y="2.6"/> <-- CV In main MK_VCO/Panels/fireball_vco_14hp_v1.scad 330 lines width = 36; // [1:1:84] // margins from edges h_margin = thickness*2; v_margin = hole_dist_top*2; Potentiometers: - One multi-pole rotary switch - number of steps. Exact configuration TBD. - One potentiometer for internal clock rate (if onboard clock is used // 11 SPDT switches (many used as SPST) 2 momentary pushbutton switches 1 rotary switch - this needs a _big_ knob, these are actually needed big board, requiring one 8-pin, one 14-pin and one with an eye towards doing it all in one module with lots of analog drum voices; based heavily on Moritz Klein's work, but will need painting. Could be glued on with CA or hot glue, if the hole smaller. // Height of the hole on the front Don't put R8 so close to R26 -- D36/R47 too close - Trim 5mm from vertical for both panels.