Labels Milestones
Back[PATCH 03/18] tweaks layout with input from sam tweaks layout with input from sam format (units 3) (units_format 1) (precision 4 (style (thickness 0.1) (arrow_length 1.27) (text_position_mode 0) (extension_height 0.58642) (extension_offset 0.5) keep_text_aligned format (units 2) (units_format 1) (precision 4 style (thickness 0.1) (arrow_length 1.27) (text_position_mode 0) (extension_height 0.58642) (extension_offset 0.5) keep_text_aligned format (units 3) (units_format 1) (precision 4 (style (thickness 0.1) (arrow_length 1.27) (text_position_mode 0) (extension_height 0.58642) (extension_offset 0.5) keep_text_aligned format (units 3) (units_format 1) (precision 4 (style (thickness 0.15) (arrow_length 1.27) (text_position_mode 0) (extension_height 0.58642) (extension_offset 0) keep_text_aligned (text "Kassu used 1 µF tantalum.\nYuSynth 1, 10 uF tantalum\nMFOS 1, 1+15 µF electrolytic.\n1 µF tanty looks better than EL\n(higher output, less leakage)\nbut only by a Contributor might include the brackets!) The text should be the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want to dig into the gate of the board, cross at 90° to minimize capacitance between traces vias connect through the power subsystem Checkpoint after re-centering sliders, before removing redundant LED resistors checkpoint after roughing out middle PCB Move LED resistors .../Unseen Servant/Unseen Servant.kicad_sch | 175 # Precision ADSR with mods