Labels Milestones
BackFrom Tayda, per their datasheet, differ in height by 1.65 mm. The 3PDT I used appears to be able to add picture Schematics/{schematic_bugs_v1.txt => schematic_bugs_v1.md} | 3 | 4.7k | Resistor | | | Tayda | A-805 | | Tayda | A-804 | | D 2 pin Molex connector 2.54 mm spacing D 2 pin Molex header 2.54 mm spacing R23, R24, R25, R27 Switch, triple pole double throw K switch dual double-pole single-throw OFF-ON D Double Pole Single Throw (SPST) switch, small symbol D Switch, dual pole triple throw, 3 position switch, SP3T K switch sp3t ON-ON-ON D Switch, triple pole double throw, illuminated paddle, red and green LEDs K switch dp3t ON-ON-ON D Switch, single pole normally-open tactile switch SPST right angle, stacked (https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/484/48406/484060001_sd.pdf USB 3.0 type A Plug, Horizontal, http://katalog.we-online.de/em/datasheet/692112030100.pdf usb A plug horizontal Micro USB B receptable with flange, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10118193.pdf USB Micro-B Receptacle SMD Wire Pad, Square, SMD Pad, 5mm x 10mm, MesurementPoint Square SMDPad 5mmx10mm Wuerth WR-WTB series connector, 64801011622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator Hirose DF13 through hole, DF11-30DP-2DSA, 15 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator Fuse SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 4.5mm, height 7, Wuerth electronics 9771120360 (https://katalog.we-online.com/em/datasheet/9771120360.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SOP, 8 Pin (http://www.ti.com/lit/ml/mpds400/mpds400.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, SM30B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator Soldered wire connection, for 6 times 0.127 mm² wires, reinforced insulation, conductor diameter 0.5mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-4-5.08 pitch 5.08mm size 25.4x8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-605, 45Degree (cable under 45degree), 1 pins, pitch 10mm, size 242x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-3-4-5.08, 4 pins, pitch 7.5mm, size 37.5x11mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-203, 45Degree (cable under 45degree), 3 pins, pitch 3.81mm, size 7.51x7.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-107 45Degree pitch 5mm.
New Pull Request