Labels Milestones
Back43160-1106, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator connector Molex CLIK-Mate series connector, DF3EA-04P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 64 Pin, dual row male, vertical entry, strain relief clip Harwin LTek Connector, 6 pins, dual row male, vertical entry Harwin LTek Connector, 17 pins, single row male, vertical entry Harwin LTek Connector, 8 pins, pitch 3.5mm, size 7.7x7mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00084 vertical pitch 2.5mm size 10.5x5mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-524, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 25x10.5mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_317031_RT10NxxHGLU_OFF-022897S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00287, 2 pins, diameter 3.0mm z-position of LED center 2.0mm 2 pins Rectangular size 5.0x5.0mm^2, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.6mm 2 pins LED Round FlatTop Rectangular size 4.8x2.5mm^2 diameter 2.0mm SMD pad rectangle square SMD pads Net tie, 3 pin, 1.0mm round THT pads Net tie, 3 pin, 1.0mm round THT pads Net tie, 3 pin, 0.5mm square SMD pads Net tie, 2 pin, 1.0mm round THT pads Net tie, 3 pin, 0.5mm square SMD pads Net tie, 4 pin, 1.0mm round THT pads Net tie, 2 pin, 0.3mm round THT pads Net tie, 4 pin, 2.0mm square SMD pads Net tie, 3 pin, 0.5mm square SMD rectangular pad as test Point, square 3.0mm side length SMD rectangular pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-209, 45Degree (cable under 45degree), 8 pins, pitch 5.08mm, size 71.1x11.2mm^2, drill diamater 1.2mm, pad diameter 1.4mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a 1uF capacitor; expand a bit, but also size it for a single 2.5 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with.
New Pull Request