synth_tools

Back

Height=5mm, Non-Polar Electrolytic Capacitor C Rect series Radial pin pitch 5.08mm size 25.4x11.2mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00084, vertical (cable from top), 8 pins, pitch 5mm, size 60x9mm^2, drill diamater 1.4mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00010, 11 pins, pitch 7.5mm, size 67.5x10.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-324, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 59x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00233 pitch 5.08mm size 30.5x8.45mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00290 pitch 5.08mm size 20.3x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00079, vertical (cable from top), 2 pins, pitch 10mm, size 115x9mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-10-5.08 pitch 5.08mm size 45.7x10.6mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-308, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 31.5x15mm^2, drill diamater 1.15mm, pad diameter 2.4mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00064, 45Degree (cable under 45degree), 10 pins, pitch 10mm, size 82.3x14mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00012, 2 pins, diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 3.0mm z-position of LED center 3.0mm 2 pins LED, diameter 3.0mm z-position of LED center 3.0mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 9.0mm 2 pins LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins C1: enlarge footprint; a box film cap instead of implementing this with all distributions of the rhythm: "lite", normal, and normal both GND - Gate out (could normal to TP10, optional Once/Cont 11 Toggle Switches, 2pin: all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below Clock POT is too small for a single 0.75 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 1.5 mm² wires, reinforced insulation, conductor.

New Pull Request

Labels Milestones