synth_tools

Back

With 3 positions D 2 pin Molex connector 2.54 mm spacing KK254 Molex connector 2 pin Molex connector 2.54 mm spacing KK254 Molex header 2 pin Molex header 2.54 mm spacing D 3 rotary switches are actually 2p6t, which means only six different step counts are available until the replacement arrives Wiring SW15 (once/stop) and cascade out is easier done via skywiring; only one cross-board wire is needed, vs 3 if the PCB is used. C1 is too small for a single 0.127 mm² wire, reinforced insulation, conductor diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type059_RT06306HBWC, 6 pins, pitch 5mm, size 30x9.8mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-13-5.08, 13 pins, pitch 10mm, size 85x9mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-1,5-8 pitch 5mm size 55x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-4-3.5-H, 4 pins, pitch 5mm, size 37.3x14mm^2, drill diamater 1.15mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type175_RT02702HBLC pitch 7.5mm size 15x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00064 45Degree pitch 5mm size 17.3x14mm^2 drill 1.15mm.

New Pull Request

Labels Milestones