synth_tools

Back

LEM HX05-NP hall effect current transducer LEM_LTSR-NP 5V supply voltage series https://www.lem.com/sites/default/files/products_datasheets/ltsr_6-np.pdf DFN, 4 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/DSC60XX-Ultra-Small-Ultra-Low-Power-MEMS-Oscillator-DS20005625C.pdf), generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf6028_en.pdf Inductor, TDK, SLF12575, 12.5mmx12.5mm (Script generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 0.5 mm² wires, reinforced insulation, conductor diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00072, 7 pins, pitch 5.08mm, size 10.2x11mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-7-5.08, 7 pins, pitch 7.5mm, size 21.5x15mm^2, drill diamater 1.5mm, 2 pads, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00236, 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf module CMS SOT223 6 pins, pitch 7.5mm, size 51.5x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-2-5.08, 2 pins, pitch 2.5mm, size 22.2x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-416, 45Degree (cable under 45degree), 16 pins, pitch 5mm, size 16.5x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00233 pitch 5.08mm size 15.2x8.45mm^2 drill 1.1mm pad 2.1mm Terminal Block Phoenix MKDS-3-5-5.08 pitch 5.08mm length 5.2mm diameter 2.7mm Diode, DO-41_SOD81 series, Axial, Horizontal, pin pitch=15.24mm, 0.5W = 1/2W length 9mm width 3.3mm Capacitor C, Rect series, Radial, pin pitch=22.50mm, , length*width=26.5*6mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 7.62mm length 3.04mm diameter 1.6mm wire loop as test point, loop diameter 1.8mm, hole diameter 0.7mm, wire diameter 1.0mm wire loop as test point, loop diameter2.6mm, hole diameter 1.1mm, length 10.2mm, width 3.5mm solder Pin_ with flat fork, hole diameter 1.4mm, outer diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-13-5.0-H pitch 5mm size 15x10.2mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix PT-1,5-8-5.0-H, 8 pins, pitch 5.08mm, size 76.2x9.8mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00081 pitch 10mm size 105x8.1mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00010 pitch 5mm size 31.5x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-509, 45Degree (cable under 45degree), 16 pins, pitch 10.2mm, size 96.5x8.3mm^2, drill diamater 1.15mm, pad diameter 2.3mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief.

New Pull Request

Labels Milestones