X="5.475" y="4.55"/> <-- CV In main MK_VCO/Panels/fireball_vco_14hp_v1.scad 330 lines width = 36; // [1:1:84] /* [Holes] */ hole_dist_top = 2.5; rail_clearance = 8; // mm from very top/bottom edge and where it is the main (cylindrical or conical) knob shape, without the stem. [mm] knob_height = 16; // Bottom radius of the rail + a safety margin // Width of module (HP) width = 12; hole_vdist = 44.5; hole_hdist = 65; hole_diameter = 2; center_adjust = 5; // Height of the YuSynth ADSR, though without the two RENDER hooks. * These work in progress; better README to come soon. Meanwhile: **Untested hardware and software — Do not connect the Normal pin for op amp in schmidt inverter mode, maybe both 7808 and hex inverter trigger are unnecessary? Alternative: Midi -> CV Alternative: CV from something else use a modified version of bornier6 Terminal Block WAGO 804-309, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 39.8x14mm^2, drill diamater 0.7mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00307, 11 pins, pitch 5.08mm, size 66x9.8mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00001, 2 pins, pitch 5mm, size 6.5x15mm^2, drill diamater 1.4mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-2-2.5-V-THR, vertical (cable from top), 14 pins, pitch 9.52mm, size 19x12.5mm^2, drill diamater 1.3mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam.